|
|
Form Factor |
Mini-ITX |
Dimensions |
6.7" x 6.7", (17.02cm x 17.02cm) |
|
|
CPU |
- Socket G2 (rPGA 988B)
- Intel® 2nd Generation Core i7/i5/i3, Pentium, Celeron Mobile processors supported
|
|
|
Memory Capacity |
- 2x 204-pin DDR3 SODIMM sockets
- Supports up to 16 GB DDR3 non-ECC Un-Buffered memory
- 1333/1066/800MHz
|
Memory Type |
- 1333/1066/800MHz unbuffered DDR3 SO-DIMM, 204-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
|
Chipset |
|
SATA |
- 4x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
- 2x SATA3 (6Gbps) w/ RAID 0, 1
|
Network Controllers |
- Intel® 82579LM and 82574L, 2x Gigabit LAN ports
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
|
VGA |
- Intel integrated graphics
|
Super I/O |
|
|
|
Serial ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
USB |
- 11x USB 2.0 ports total
(6x rear + 4x via headers + 1 Type-A) |
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 serial port; 1x header
| |
|
|
|
Mid-Tower |
-
CSE-731D-300B
-
CSE-731i-300B
-
CSE-732D-500B
-
CSE-732D-865B
-
CSE-732D2-500B
-
CSE-732D2-865B
-
CSE-732D4-500B
-
CSE-732D4-865B
-
CSE-732D4F-500B
-
CSE-732D4F-865B
-
CSE-732i-500B
-
CSE-732i-865B
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a
Revision K chassis is recommended for most models.
|
|
|
BIOS Type |
- 8Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- ACPI 1.0 / 2.0
- Plug and Play (PnP)
- SMBIOS 2.3
- UEFI
- USB Keyboard support
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
-
Super Doctor III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
|
CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of 3 fan headers supporting up to 3 fans
- Three 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
| |